DIY Wooden Kit ship LSM0601 Wooden kit Wooden kit The boat of Peter I Scale 124

  

New: A brand-new, unused, unopened, undamaged item (including handmade items). For adults and children from14 years. Sizes:length 320 mm, width 100 mm, height 295 mm / 12.593.9311.1 in. Modern productiontechnology: Shell planking and other hull structure made by lasercutting. Laser cutting of each bodyboard and other elements of the model.

Elements of parts forassembling a model from noble species of wood, brass metal parts madeby the method of photo etching, turned brass nails from brass, sewedsails in the kit, detailed step-by-step photoinstruction. Elementsfor assembling a model from noble breeds of wood, step-by-stepinstruction with explanations of model assembly, sewed sails in aset, yarn for making rigging, brass wire, brass parts, cast guns ofmetal, color flags, external aft décor plastic.

Botik Peter I - "TheGrandfather of the Russian Fleet". LS MODEL presents its newmodel for the self-assembly of the Wooden Kit - Peter I.

The team model of museumquality, was created strictly according to archival drawings and hashistorical authenticity. In the set for theconstruction of the wooden model Wooden Kit includes: elements ofparts made of noble species of wood (full laser cutting), astep-by-step instruction with explanations of the assembly of themodel, patterns and fabric for making sails, yarn for making rigging, brass wire, brass, cast gun barrels of metal, colored flags, externalaft decor (plastic molding). In the ancestral village ofIzmaylovo in 1688, Peter I found an old boat, according to oneversion, he was English. By order of the Tsar, the wooden vessel wasrestored, as was the mast and sails.

The length of the boat alongthe measurement points of 1837 between perpendiculars was 6,019meters. Width without plating 1,911 meters. Width with plating 1,968meters. The height of the board along the midsection is 0.813 meters. The height of the bead on the stem is 0.997 meters.

The height of theside at the after stove is 1.003 meters. The width of the transom atthe height of the gunwale is 0.948 meters. The height of the mast is6,606 meters. The mast diameter of the can is 0.152 meters. Thelength between the stems is 6.096 meters.

The height of the transomis 1.4 meters. In terms of dimensions andsails, the boat is close to the modern Yal-6, but much heavier thanit. The weight of the hull was 1286.71 kg, and the sail area is about18 sq. The frames of the boat areoak, chopped, with a cross section of 70 x 57 mm.

Each frame consistsof two branches, the right and the left side, laid in cross-eachother. Between the main there are additional shortened frames, extending from the keel to half the height of the bead. All thebranches of the frames lie on the keel and from above are coveredwith a killing binder with a section of 304.8 x 50.8 mm.

The sides, in addition tothe strong gunwale (111.1 x 50.8 mm), are strengthened by a barhoutlaid directly on the frames. The boat is trimmed with the coniferousboards with a thickness of 28.6 mm. On the gunwale, the boat isstaggered by three pinheads (skarms). The fourth was inserted underthe removable liner at the beginning of the right spichel (sternbulwark).

During the next repair this liner was sealed tightly andeven removed the pillow of the skarma, the trail of which remained. Rowing was conducted in the swing, but since the boat is quite heavy, it is quite possible that for each oar two people were sitting. Decor boutique: between thegunwale and the barge on the side of the boat 64 alternatingtriangles of white, blue and red are marked.

Fodder bulwarks arecovered with a painting with the motif of rhythmically repeatedscrolls of vegetative shoot. On the inner side of the transom thereis a two-headed eagle framed with a similar ornament. Gakabort botikdecorated with carvings of low relief. It consists of a storycomposition with a saint figure in the center.

From it to the rightis placed a conditionally executed boat, close in silhouette to abead, and to the left a small structure. This composition is framedby vegetative ornamentation from large leaves of acanthus and freecurls. The carving of an ornament differs expressiveness andlaconicism of the artistic language, thanks to which, its clear formsare visible not only close, but also from a long distance. Below thecomposition, on the transom. Peter I, swimming on theboat along the Promenade Pond and the Yauza River, learned to sail.

But Yauza was too narrow, and the Prosyanoy pond was small and thetsar transported the boat to Pleshcheyevo, which became the cradle ofthe Russian navy. The creation of a comicflotilla on Lake Pereslavl became a milestone in the history ofRussian military shipbuilding. Maneuvering on the waters ofPleshcheeva Lake strengthened Peter I in the intention to create afleet for approval on the shores of the Azov and Baltic seas.

In1722, Peter I called the boat the grandfather of the Russianfleet. Figure, the mast and clothfor sails as a gift. Instruction is in Russian, but it includes many pictures!! Instruction with pictureswill be enought to build the model!!

Iship this item from USA using POST SERVICE. Deliverytime depends on your internal Custom and Postal Services.